712/48 Avant Bandpass Filter带通滤光片
• 透过率Tavg > 93% 688 – 736 nm
• 中心波长 712 nm,GMBW 48 nm
• 带宽FWHM of 51 nm
712/48 Avant Bandpass Filter带通滤光片
• 透过率Tavg > 93% 688 – 736 nm
• 中心波长 712 nm,GMBW 48 nm
• 带宽FWHM of 51 nm
滤光片型号:AF01-712/48-25

AF01-712/48-25透过率曲线,Semrock
| Optical Specifications | Value | 
|---|---|
| Transmission Band 1 | Tavg > 93% 688 – 736 nm | 
| Blocking Band 1 | ODavg > 5 200 – 275 nm (Design specification – measurements are noise-floor limited). | 
| Blocking Band 2 | ODavg > 6 275 – 630 nm | 
| Blocking Band 3 | ODavg > 10 630 – 677 nm (Design specification – measurements are noise-floor limited) | 
| Blocking Band 4 | OD > 3.5 682.5 nm | 
| Blocking Band 5 | ODavg > 6 746 – 850 nm | 
| Blocking Band 6 | ODavg > 2 850 – 1150 nm | 
| Center Wavelength 1 | 712 nm | 
| Guaranteed Minimum Bandwidth 1 | 48 nm | 
| FWHM Bandwidth 1 (nominal) | 51 nm | 
| General Filter Specifications | Value | 
| Angle of Incidence | 0 ± 5 degrees | 
| Cone Half-angle | 7 degrees | 
| Optical Damage Rating | Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs. | 
| Physical Filter Specifications | Value | 
| Transverse Dimensions (diameter) | 25 mm | 
| Transverse Tolerance | + 0.0 / – 0.1 mm | 
| Filter Thickness (mounted) | 3.5 mm | 
| Filter Thickness Tolerance (mounted) | ± 0.1 mm | 
| Clear Aperture | ≥ 22 mm | 
| Scratch-Dig | 60-40 | 
| Filter Thickness (unmounted) | 2.0 mm | 
| Filter Thickness Tolerance (unmounted) | ± 0.1 mm | 
| Orientation | Arrow on ring indicates preferred direction of propagation of light |