378/474/575 nm BrightLine 三通带带通滤光片
- 透过率Tavg > 85%， 352 – 404 nm； Tavg > 93%， 461 – 487.5 nm & Tavg > 93%，562.5 – 587.5 nm
- 中心波长 378 nm, 474 nm & 575 nm； GMBW带宽 52 nm, 26.5 nm & 25 nm
FF01-378/474/575-25
Description
378/474/575 nm BrightLine 三通带带通滤光片
滤光片型号：FF01-378/474/575-25
Theoretical Spectrum for Part Number: FF01-378/474/575-25
FF01-378/474/575-25带通滤光片透过率曲线，Semrock
378/474/575 nm BrightLine 三通带带通滤光片，25 mm直径，5 mm厚度
采用Semrock单基板结构的单个多波段荧光带通滤光片。这些滤光片具有极高的透过率、陡峭且轮廓分明的边缘，以及通带之间的出色阻断。全薄膜硬质膜层结构，性能和可靠性十分优异。
滤光片参数：
| Optical Specifications | Value |
|---|---|
| Transmission Band 1 | Tavg > 85% 352 – 404 nm |
| Transmission Band 2 | Tavg > 93% 461 – 487.5 nm |
| Transmission Band 3 | Tavg > 93% 562.5 – 587.5 nm |
| Blocking Band 1 | ODavg > 5 200 – 275 nm (Design specification – measurements are noise-floor limited). |
| Blocking Band 2 | ODavg > 5 275 – 300 nm |
| Blocking Band 3 | ODavg > 6 300 – 341.5 nm |
| Blocking Band 4 | OD > 3.5 409 nm |
| Blocking Band 5 | ODavg > 8 414 – 450 nm (Design specification – measurements are noise-floor limited) |
| Blocking Band 6 | OD > 3.5 455.5 nm |
| Blocking Band 7 | OD > 3.5 493.5 nm |
| Blocking Band 8 | ODavg > 8 499.5 – 546 nm (Design specification – measurements are noise-floor limited) |
| Blocking Band 9 | OD > 3.5 552.5 nm |
| Blocking Band 10 | OD > 3.5 596.5 nm |
| Blocking Band 11 | ODavg > 8 604 – 800 nm (Design specification – measurements are noise-floor limited). |
| Blocking Band 12 | ODavg > 4 800 – 925 nm |
| Blocking Band 13 | ODavg > 2 925 – 1100 nm |
| Center Wavelength 1 | 378 nm |
| Center Wavelength 2 | 474 nm |
| Center Wavelength 3 | 575 nm |
| Guaranteed Minimum Bandwidth 1 | 52 nm |
| Guaranteed Minimum Bandwidth 2 | 26.5 nm |
| Guaranteed Minimum Bandwidth 3 | 25 nm |
| FWHM Bandwidth 1 (nominal) | 57.3 nm |
| FWHM Bandwidth 2 (nominal) | 30.1 nm |
| FWHM Bandwidth 3 (nominal) | 31.3 nm |
| General Filter Specifications | Value |
| Angle of Incidence | 0 ± 5 degrees |
| Cone Half-angle | 7 degrees |
| Optical Damage Rating | Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours. |
| Physical Filter Specifications | Value |
| Transverse Dimensions (diameter) | 25 mm |
| Transverse Tolerance | + 0.0 / – 0.1 mm |
| Filter Thickness (mounted) | 5.0 mm |
| Filter Thickness Tolerance (mounted) | ± 0.1 mm |
| Clear Aperture | ≥ 21 mm |
| Scratch-Dig | 60-40 |
| Filter Thickness (unmounted) | 2.0 mm |
| Filter Thickness Tolerance (unmounted) | ± 0.1 mm |
| Orientation | Arrow on ring indicates preferred direction of propagation of light |
