390/482/532/640 nm BrightLine 四通带带通滤光片
- 透过率Tavg > 90%, 370 – 410 nm; Tavg > 90%, 473 – 491 nm; Tavg > 90%, 530.5 – 533.5 nm & Tavg > 90%, 632.8 – 647.1 nm
 - 中心波长 390 nm, 482 nm, 532 nm & 640 n;GMBW带宽 40 nm, 18 nm, 3 nm & 14 nm
 
滤光片型号:FF01-390/482/532/640-25
Theoretical Spectrum for Part Number: FF01-390/482/532/640-25

FF01-390/482/532/640-25带通滤光片透过率曲线,Semrock
| Optical Specifications | Value | 
|---|---|
| Transmission Band 1 | Tavg > 85% 370 – 410 nm | 
| Transmission Band 2 | Tavg > 90% 473 – 491 nm | 
| Transmission Band 3 | Tavg > 90% 530.5 – 533.5 nm | 
| Transmission Band 4 | Tavg > 90% 632.8 – 647.1 nm | 
| Blocking Band 1 | ODavg > 5 200 – 364 nm | 
| Blocking Band 2 | OD > 3.5 419.8 nm | 
| Blocking Band 3 | ODavg > 6 429.5 – 462 nm | 
| Blocking Band 4 | OD > 3.5 467.5 nm | 
| Blocking Band 5 | OD > 3.5 496.8 nm | 
| Blocking Band 6 | ODavg > 6 502.5 – 518.5 nm | 
| Blocking Band 7 | OD > 3.5 524.5 nm | 
| Blocking Band 8 | OD > 3.5 541.8 nm | 
| Blocking Band 9 | ODavg > 6 550 – 613 nm | 
| Blocking Band 10 | OD > 3.5 622.9 nm | 
| Blocking Band 11 | OD > 3.5 655.1 nm | 
| Blocking Band 12 | ODavg > 6 663 – 850 nm | 
| Blocking Band 13 | ODavg > 4 850 – 925 nm | 
| Blocking Band 14 | ODavg > 2 925 – 1100 nm | 
| Center Wavelength 1 | 390 nm | 
| Center Wavelength 2 | 482 nm | 
| Center Wavelength 3 | 532 nm | 
| Center Wavelength 4 | 640 nm | 
| Guaranteed Minimum Bandwidth 1 | 40 nm | 
| Guaranteed Minimum Bandwidth 2 | 18 nm | 
| Guaranteed Minimum Bandwidth 3 | 3 nm | 
| Guaranteed Minimum Bandwidth 4 | 14 nm | 
| FWHM Bandwidth 1 (nominal) | 44.5 nm | 
| FWHM Bandwidth 2 (nominal) | 22.4 nm | 
| FWHM Bandwidth 3 (nominal) | 8 nm | 
| FWHM Bandwidth 4 (nominal) | 20 nm | 
| General Filter Specifications | Value | 
| Angle of Incidence | 0 ± 5 degrees | 
| Cone Half-angle | 7 degrees | 
| Optical Damage Rating | Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours. | 
| Physical Filter Specifications | Value | 
| Transverse Dimensions (diameter) | 25 mm | 
| Transverse Tolerance | + 0.0 / – 0.1 mm | 
| Filter Thickness (mounted) | 5.0 mm | 
| Filter Thickness Tolerance (mounted) | ± 0.1 mm | 
| Clear Aperture | ≥ 21 mm | 
| Scratch-Dig | 60-40 | 
| Filter Thickness (unmounted) | 2.0 mm | 
| Filter Thickness Tolerance (unmounted) | ± 0.1 mm | 
| Orientation | Arrow on ring indicates preferred direction of propagation of light |