FF01-432/515/595/730-25

432/515/595/730 nm BrightLine 四通带带通滤光片

  • 透过率Tavg > 93%, 414 – 450 nm; Tavg > 93%, 499.5 – 530 nm; Tavg > 93%, 580 – 611 nm & Tavg > 93%, 661 – 800 nm
  • 中心波长 432 nm, 515 nm, 595 nm & 730 nm; GMBW带宽 36 nm, 30 nm, 31 nm & 139 nm

Description

432/515/595/730 nm BrightLine 四通带带通滤光片

滤光片型号:FF01-432/515/595/730-25

Theoretical Spectrum for Part Number: FF01-432/515/595/730-25

FF01-432/515/595/730-25插图

FF01-432/515/595/730-25带通滤光片透过率曲线,Semrock

432/515/595/730 nm BrightLine 四通带带通滤光片,25 mm直径,3.5 mm厚度

采用Semrock单基板结构的单个多波段荧光带通滤光片。这些滤光片具有极高的透过率、陡峭且轮廓分明的边缘,以及通带之间的出色阻断。全薄膜硬质膜层结构,性能和可靠性十分优异。

滤光片参数:

Optical Specifications Value
Transmission Band 1 Tavg > 93% 414 – 450 nm
Transmission Band 2 Tavg > 93% 499.5 – 530 nm
Transmission Band 3 Tavg > 93% 580 – 611 nm
Transmission Band 4 Tavg > 93% 661 – 800 nm
Blocking Band 1 ODavg > 4 200 – 381 nm
Blocking Band 2    ODavg > 8 381 – 404 nm (Design specification – measurements are noise-floor limited).
Blocking Band 3 OD > 3.5 409 nm
Blocking Band 4 OD > 3.5 455.5 nm
Blocking Band 5    ODavg > 8 461 – 487.5 nm (Design specification – measurements are noise-floor limited)
Blocking Band 6 OD > 3.5 493.5 nm
Blocking Band 7 OD > 3.5 536.5 nm
Blocking Band 8    ODavg > 8 543 – 566 nm (Design specification – measurements are noise-floor limited)
Blocking Band 9 OD > 3.5 573 nm
Blocking Band 10 OD > 3.5 618.5 nm
Blocking Band 11    ODavg > 8 626 – 644 nm (Design specification – measurements are noise-floor limited)
Blocking Band 12 OD > 3.5 651.8 nm
Blocking Band 13 ODavg > 5 815 – 900 nm
Center Wavelength 1 432 nm
Center Wavelength 2 514.8 nm
Center Wavelength 3 595.5 nm
Center Wavelength 4 730.5 nm
Guaranteed Minimum Bandwidth 1 36 nm
Guaranteed Minimum Bandwidth 2 30.5 nm
Guaranteed Minimum Bandwidth 3 31 nm
Guaranteed Minimum Bandwidth 4 139 nm
FWHM Bandwidth 1 (nominal) 39.7 nm
FWHM Bandwidth 2 (nominal) 35.5 nm
FWHM Bandwidth 3 (nominal) 36.2 nm
FWHM Bandwidth 4 (nominal) 147.2 nm
General Filter Specifications Value
Angle of Incidence 0 ± 5 degrees
Cone Half-angle 7 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications    Value
Transverse Dimensions (diameter) 25 mm
Transverse Tolerance + 0.0 / – 0.1 mm
Filter Thickness (mounted) 3.5 mm
Filter Thickness Tolerance (mounted) ± 0.1 mm
Clear Aperture ≥ 22 mm
Scratch-Dig 60-40
Filter Thickness (unmounted) 2.0 mm
Filter Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light

标题

返回顶部