FF01-446/523/600/677-25

446/523/600/677 nm BrightLine 四通带带通滤光片

  • 透过率Tavg > 90%, 429.5 – 462.0 nm; Tavg > 90%, 502.5 – 544.5 nm; Tavg > 90%, 582 – 617.5 nm & Tavg > 90%, 663 – 690.5 nm
  • 中心波长 446 nm, 523.5 nm, 600 nm & 677 nm; GMBW带宽 32.5 nm, 42 nm, 35.5 nm & 27.5 nm

Description

446/523/600/677 nm BrightLine 四通带带通滤光片

滤光片型号:FF01-446/523/600/677-25

Theoretical Spectrum for Part Number: FF01-446/523/600/677-25

FF01-446/523/600/677-25插图

FF01-446/523/600/677-25带通滤光片透过率曲线,Semrock

446/523/600/677 nm BrightLine 四通带带通滤光片,25 mm直径,3.5 mm厚度

采用Semrock单基板结构的单个多波段荧光带通滤光片。这些滤光片具有极高的透过率、陡峭且轮廓分明的边缘,以及通带之间的出色阻断。全薄膜硬质膜层结构,性能和可靠性十分优异。

滤光片参数:

Optical Specifications Value
Transmission Band 1 Tavg > 90% 429.5 – 462.0 nm
Transmission Band 2 Tavg > 90% 502.5 – 544.5 nm
Transmission Band 3 Tavg > 90% 582 – 617.5 nm
Transmission Band 4 Tavg > 90% 663 – 690.5 nm
Blocking Band 1 ODavg > 4 200 – 370 nm
Blocking Band 2    ODavg > 8 370 – 410 nm (Design specification – measurements are noise-floor limited).
Blocking Band 3 OD > 3.5 419.8 nm
Blocking Band 4 OD > 3.5 467.5 nm
Blocking Band 5    ODavg > 8 473 – 491 nm (Design specification – measurements are noise-floor limited)
Blocking Band 6 OD > 3.5 496.8 nm
Blocking Band 7 OD > 3.5 551.8 nm
Blocking Band 8    ODavg > 8 559 – 568.2 nm (Design specification – measurements are noise-floor limited)
Blocking Band 9 OD > 3.5 575 nm
Blocking Band 10 OD > 3.5 625.3 nm
Blocking Band 11    ODavg > 8 632.8 – 647.1 nm (Design specification – measurements are noise-floor limited).
Blocking Band 12 OD > 3.5 655 nm
Blocking Band 13 ODavg > 5 706 – 900 nm
Center Wavelength 1 446 nm
Center Wavelength 2 523.5 nm
Center Wavelength 3 600 nm
Center Wavelength 4 677 nm
Guaranteed Minimum Bandwidth 1 32.5 nm
Guaranteed Minimum Bandwidth 2 42 nm
Guaranteed Minimum Bandwidth 3 35.5 nm
Guaranteed Minimum Bandwidth 4 27.5 nm
FWHM Bandwidth 1 (nominal) 36.9 nm
FWHM Bandwidth 2 (nominal) 46.4 nm
FWHM Bandwidth 3 (nominal) 40.8 nm
FWHM Bandwidth 4 (nominal) 34.4 nm
General Filter Specifications Value
Angle of Incidence 0 ± 5 degrees
Cone Half-angle 7 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications    Value
Transverse Dimensions (diameter) 25 mm
Transverse Tolerance + 0.0 / – 0.1 mm
Filter Thickness (mounted) 3.5 mm
Filter Thickness Tolerance (mounted) ± 0.1 mm
Clear Aperture ≥ 22 mm
Scratch-Dig 60-40
Filter Thickness (unmounted) 2.0 mm
Filter Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light

标题

返回顶部