514/9 nm MaxDiode 激光器消杂滤光片
- 激光波长 = 514 nm
- 透过率Tabs > 90%， 509.5 – 518.5 nm
- 中心波长 514 nm，GMBW带宽9 nm
LD02-514/9-12.5
Description
514/9 nm MaxDiode 激光器消杂滤光片
滤光片型号：LD02-514/9-12.5
Theoretical Spectrum for Part Number:LD02-514/9-12.5
LD02-514/9-12.5 MaxDiode 激光器消杂滤光片透过率曲线，Semrock
514/9 nm MaxDiode 激光器消杂滤光片，12.5 mm直径，厚度3.5 mm
消除噪声的同时保持理想的激光透过。MaxDiode 激光器消杂滤光片是激光仪器以及实验室使用二极管激光器进行荧光激发和其他光谱应用的理想选择。
新的 LD02 滤光片与 LD01 的不同之处在于，它将 OD 5 阻挡范围扩展至 350 – 900 nm 以上，以抑制主激发范围之外的任何杂散光。
滤光片参数：
| Optical Specifications | Value |
|---|---|
| Transmission Band 1 | Tabs > 90% 509.5 - 518.5 nm |
| Transmission Band 2 | Tavg > 93% 509.5 - 518.5 nm |
| Transmission Ripple | Tripple < 3% 509.5 - 518.5 nm |
| Blocking Band 1 | ODavg > 5 350 - 498 nm |
| Blocking Band 2 | OD > 3.5 525.5 nm |
| Blocking Band 3 | ODavg > 5 530 900 nm |
| Center Wavelength 1 | 514 nm |
| GMBW 1 | 9 nm |
| FWHM 1 (nominal) | 14.1 nm |
| General Filter Specifications | Value |
| Angle of Incidence | 0 ± 5 degrees |
| Cone Half-angle | 0.5 degrees |
| Optical Damage Rating | Not tested |
| Physical Filter Specifications | Value |
| Transverse Dimensions (diameter) | 12.5 mm |
| Transverse Tolerance | + 0.0 / – 0.1 mm |
| Filter Thickness (mounted) | 3.5 mm |
| Filter Thickness Tolerance (mounted) | ± 0.1 mm |
| Clear Aperture | ≥ 10 mm |
| Scratch-Dig | 60-40 |
| Filter Thickness (unmounted) | 2.0 mm |
| Filter Thickness Tolerance (unmounted) | ± 0.1 mm |
| Orientation | Arrow on ring indicates preferred direction of propagation of light |
