FF01-438/509/578-25

438/509/578 nm BrightLine 三通带带通滤光片

  • 透过率Tavg > 93%, 426 – 450 nm; Tavg > 93%, 497.6 – 519.5 nm & Tavg > 93%, 567.4 – 588.6 nm
  • 中心波长 438 nm, 509 nm & 578 nm; GMBW带宽 24 nm, 21.9 nm & 21.2 nm

Description

438/509/578 nm BrightLine 三通带带通滤光片

滤光片型号:FF01-438/509/578-25

Theoretical Spectrum for Part Number: FF01-438/509/578-25

FF01-438/509/578-25插图

FF01-438/509/578-25带通滤光片透过率曲线,Semrock

438/509/578 nm BrightLine 三通带带通滤光片,25 mm直径,5 mm厚度

采用Semrock单基板结构的单个多波段荧光带通滤光片。这些滤光片具有极高的透过率、陡峭且轮廓分明的边缘,以及通带之间的出色阻断。全薄膜硬质膜层结构,性能和可靠性十分优异。

滤光片参数:

Optical Specifications Value
Transmission Band 1 Tavg > 93% 426 – 450 nm
Transmission Band 2 Tavg > 93% 497.6 – 519.5 nm
Transmission Band 3 Tavg > 93% 567.4 – 588.6 nm
Blocking Band 1    ODavg > 5 200 – 275 nm (Design specification – measurements are noise-floor limited).
Blocking Band 2 ODavg > 5 275 -­ 300 nm
Blocking Band 3 ODavg > 6 300 – 421.1 nm
Blocking Band 4 OD > 3.5 458.5 nm
Blocking Band 5    ODavg > 8 464 – 486 nm (Design specification – measurements are noise-floor limited)
Blocking Band 6 OD > 3.5 491.8 nm
Blocking Band 7 OD > 3.5 525.8 nm
Blocking Band 8    ODavg > 8 532 – 554 nm (Design specification – measurements are noise-floor limited)
Blocking Band 9 OD > 3.5 560.7 nm
Blocking Band 10 OD > 3.5 595.8 nm
Blocking Band 11    ODavg > 8 603 – 800 nm (Design specification – measurements are noise-floor limited)
Blocking Band 12 ODavg > 6 800 – 850 nm
Blocking Band 13 ODavg > 4 850 – 925 nm
Blocking Band 14 ODavg > 2 925 – 1100 nm
Center Wavelength 1 438 nm
Center Wavelength 2 509 nm
Center Wavelength 3 578 nm
Guaranteed Minimum Bandwidth 1 24 nm
Guaranteed Minimum Bandwidth 2 21.9 nm
Guaranteed Minimum Bandwidth 3 21.2 nm
FWHM Bandwidth 1 (nominal) 28.8 nm
FWHM Bandwidth 2 (nominal) 25.5 nm
FWHM Bandwidth 3 (nominal) 25.2 nm
General Filter Specifications Value
Angle of Incidence 0 ± 5 degrees
Cone Half-angle 7 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications    Value
Transverse Dimensions (diameter) 25 mm
Transverse Tolerance + 0.0 / – 0.1 mm
Filter Thickness (mounted) 5.0 mm
Filter Thickness Tolerance (mounted) ± 0.1 mm
Clear Aperture ≥ 21 mm
Scratch-Dig 60-40
Filter Thickness (unmounted) 2.0 mm
Filter Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light

标题

返回顶部