515/588/700 nm BrightLine 三通带带通滤光片
- 透过率Tavg > 90%, 503.5 – 526.5 nm; Tavg > 90%, 560 – 615.5 nm & Tavg > 90%, 665.5 – 735.5 nm
- 中心波长 515 nm, 588 nm & 700 nm； GMBW带宽 23 nm, 55.5 nm & 70 nm
FF01-515/588/700-25
Description
515/588/700 nm BrightLine 三通带带通滤光片
滤光片型号：FF01-515/588/700-25
Theoretical Spectrum for Part Number: FF01-515/588/700-25
FF01-515/588/700-25带通滤光片透过率曲线，Semrock
515/588/700 nm BrightLine 三通带带通滤光片，25 mm直径，3.5 mm厚度
采用Semrock单基板结构的单个多波段荧光带通滤光片。这些滤光片具有极高的透过率、陡峭且轮廓分明的边缘，以及通带之间的出色阻断。全薄膜硬质膜层结构，性能和可靠性十分优异。
滤光片参数：
| Optical Specifications | Value |
|---|---|
| Transmission Band 1 | Tavg > 93% 503.5 – 526.5 nm |
| Transmission Band 2 | Tavg > 93% 560 – 615.5 nm |
| Transmission Band 3 | Tavg > 93% 665.5 – 735.5 nm |
| Blocking Band 1 | ODavg > 4 200 – 471 nm (Design specification – measurements are noise-floor limited) |
| Blocking Band 2 | ODavg > 8 471 – 491 nm |
| Blocking Band 3 | OD > 3.5 497.3 nm |
| Blocking Band 4 | OD > 3.5 534 nm |
| Blocking Band 5 | ODavg > 8 541.5 – 544.5 nm (Design specification – measurements are noise-floor limited) |
| Blocking Band 6 | OD > 3.5 552.3 nm |
| Blocking Band 7 | OD > 3.5 624.3 nm |
| Blocking Band 8 | ODavg > 8 632.8 – 647.1 nm (Design specification – measurements are noise-floor limited). |
| Blocking Band 9 | OD > 3.5 656.3 nm |
| Blocking Band 10 | ODavg > 5 750 – 900 nm |
| Center Wavelength 1 | 515 nm |
| Center Wavelength 2 | 588 nm |
| Center Wavelength 3 | 700 nm |
| Guaranteed Minimum Bandwidth 1 | 23 nm |
| Guaranteed Minimum Bandwidth 2 | 55.5 nm |
| Guaranteed Minimum Bandwidth 3 | 70 nm |
| FWHM Bandwidth 1 (nominal) | 27.7 nm |
| FWHM Bandwidth 2 (nominal) | 60.7 nm |
| FWHM Bandwidth 3 (nominal) | 75.7 nm |
| General Filter Specifications | Value |
| Angle of Incidence | 0 ± 5 degrees |
| Cone Half-angle | 7 degrees |
| Optical Damage Rating | Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours. |
| Physical Filter Specifications | Value |
| Transverse Dimensions (diameter) | 25 mm |
| Transverse Tolerance | + 0.0 / – 0.1 mm |
| Filter Thickness (mounted) | 3.5 mm |
| Filter Thickness Tolerance (mounted) | ± 0.1 mm |
| Clear Aperture | ≥ 22 mm |
| Scratch-Dig | 60-40 |
| Filter Thickness (unmounted) | 2.0 mm |
| Filter Thickness Tolerance (unmounted) | ± 0.1 mm |
| Orientation | Arrow on ring indicates preferred direction of propagation of light |
