FF01-378/474/554/635-25

378/474/554/635 nm BrightLine 四通带带通滤光片

  • 透过率Tavg > 85%, 352 – 404 nm; Tavg > 93%, 461 – 487.5 nm; Tavg > 93%, 543 – 566 nm; Tavg > 93%, 626 – 644 nm
  • 中心波长 378 nm, 474.3 nm, 554.5 nm & 635 nm,GMBW带宽 52 nm, 26.5 nm, 23 nm & 18 nm

Description

378/474/554/635 nm BrightLine 四通带带通滤光片

滤光片型号:FF01-378/474/554/635-25

Theoretical Spectrum for Part Number: FF01-378/474/554/635-25

FF01-378/474/554/635-25插图

FF01-378/474/554/635-25带通滤光片透过率曲线,Semrock

378/474/554/635 nm BrightLine 四通带带通滤光片,25 mm直径,3.5 mm厚度
采用Semrock单基板结构的单个多波段荧光带通滤光片。这些滤光片具有极高的透过率、陡峭且轮廓分明的边缘,以及通带之间的出色阻断。全薄膜硬质膜层结构,性能和可靠性十分优异。

滤光片参数:

Optical Specifications Value
Transmission Band 1 Tavg > 85% 352 – 404 nm
Transmission Band 4 Tavg > 93% 626 – 644 nm
Blocking Band 1    ODavg > 6 200 – 300 nm (Design specification – measurements are noise-floor limited).
Blocking Band 3 OD > 3.5 409 nm
Blocking Band 4    ODavg > 8 414 – 450 nm (Design specification – measurements are noise-floor limited)
Blocking Band 5 OD > 3.5 455.5 nm
Blocking Band 6 OD > 3.5 493.5 nm
Blocking Band 7    ODavg > 8 499.5 – 530 nm (Design specification – measurements are noise-floor limited)
Blocking Band 8 OD > 3.5 536.5 nm
Blocking Band 9 OD > 3.5 573 nm
Blocking Band 10    ODavg > 8 580 – 611 nm (Design specification – measurements are noise-floor limited)
Blocking Band 11 OD > 3.5 618.5 nm
Blocking Band 12 OD > 3.5 651.8 nm
Blocking Band 13    ODavg > 8 661 – 850 nm (Design specification – measurements are noise-floor limited).
Blocking Band 14 ODavg > 4 850 – 925 nm
Blocking Band 15 ODavg > 2 925 – 1100 nm
Center Wavelength 1 378 nm
Center Wavelength 2 474.3 nm
Center Wavelength 3 554.5 nm
Center Wavelength 4 635 nm
Guaranteed Minimum Bandwidth 1 52 nm
Guaranteed Minimum Bandwidth 2 26.5 nm
Guaranteed Minimum Bandwidth 3 23 nm
Guaranteed Minimum Bandwidth 4 18 nm
FWHM Bandwidth 1 (nominal) 57.3 nm
FWHM Bandwidth 2 (nominal) 30.1 nm
FWHM Bandwidth 3 (nominal) 27.5 nm
FWHM Bandwidth 4 (nominal) 22.9 nm
General Filter Specifications Value
Angle of Incidence 0 ± 5 degrees
Cone Half-angle 7 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications    Value
Transverse Dimensions (diameter) 25 mm
Transverse Tolerance + 0.0 / – 0.1 mm
Filter Thickness (mounted) 5.0 mm
Filter Thickness Tolerance (mounted) ± 0.1 mm
Clear Aperture ≥ 21 mm
Scratch-Dig 60-40
Filter Thickness (unmounted) 3.5 mm
Filter Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light

标题

返回顶部